Skip to content
CANADA CHIMNEYS / Draft

Draft: Before Hiring Checklist

Draft: Check certification, insurance, inspection scope and quote.

Updated 2026-11-20About 3 min
Affiliate disclosure: some outbound links go to commercial partners. We currently pass no tracking parameters, so we earn no commission from them; if that changes, this page will say so.
Quick answer

Draft: Check certification, insurance, inspection scope and quote. draft depends on height/blockage/pressure.

Why it matters

Weak draft usually means too long a run, too many bends or insufficient make-up air. Check blockage and damper before adding height.

Height.

Step by step

  1. Confirm the fuel: wood, gas or pellet.
  2. Sweep wood appliances at least yearly.
  3. Camera-inspect the liner for cracks.
  4. Install and test a CO alarm.

Common mistakes

  • Burning wet wood.
  • Skipping the liner inspection.
  • An uncapped flue.
  • Opening a gas appliance yourself.

Checklist

  • Fuel, last sweep, draft, cap, alarm.
  • Certified sweep.
  • Camera inspection.
  • Quote scope.

Who it is for

If this is your first Draft, narrow by Height. and Blockage. first, then look at specific models.

Key facts

  • Height.
  • Blockage.
  • Pressure.
Draft: five questions at a glance
QuestionShort answer
Draft: Sweep, Repair or ReplaceDraft: Compare liner condition, structure and budget across the three routes. draft depends on height/blockage/pressure.
Draft: What a Sweep CostsDraft: Convert sweeping, camera, cap and flashing into annual cost. draft depends on height/blockage/pressure.
Draft: Spending LessDraft: Save with seasoned wood, timely sweeping and flashing repair. draft depends on height/blockage/pressure.
Draft: Wood vs GasDraft: Compare maintenance type, risk and annual cost. draft depends on height/blockage/pressure.

FAQ

Draft: Before Hiring Checklist

Draft: Check certification, insurance, inspection scope and quote. draft depends on height/blockage/pressure.

What should I check before buying a Draft?

draft depends on height/blockage/pressure. Key checks: Height.; Blockage..

Is a Draft worth it?

Depends on use, budget and upkeep; a Draft is not automatically better because it costs more.

How to troubleshoot it yourself

Write down the symptom, when it started, and what you changed just before it appeared, then reproduce it with the smallest possible steps. A problem you can reproduce reliably is much easier to attribute to settings, hardware, or environment.

Change one variable at a time and test immediately, recording the result. Even if the issue persists, you will have ruled out causes instead of scrambling every setting at once.

When to call a professional

  • Mains power, opening the device, gas, water seals, or warranty seals are involved.
  • The device overheats, smells, makes unusual noise, or keeps tripping a breaker.
  • Two rounds of the steps above have not improved the same issue.

Budget and alternatives

Decide whether to repair, replace, or change how you use it. If the repair quote exceeds half the price of a new unit, or parts are discontinued, replacing is usually simpler; if it is only a setting or consumable, repair first.

If you replace it, include installation, consumables, and subscriptions in a three-year cost, then compare two or three models instead of chasing the first-year discount.

Log template

Date / symptom / reproduction steps / settings changed / result / next step. Keeping this log means the next similar issue can reuse your notes instead of starting over.

Next step

Work through the steps on this page in order and stop at the first one that fixes it; do not change several variables at once.

If you are about to buy or return, read the checklist and comparison pages on this site, write down the budget, installation, and support terms, then decide.

Source: NFPA / Technical Standards & Safety Authority

Top picks

ProductBest forPrice
Certified SweepSweepMidSee buying guide
CO AlarmAlarmLowSee buying guide
Chimney CapCapLowSee buying guide